Animation > Tools > Set Motion
 
 
 

Applies motion path animation to any valid active objects.

See Also

Animating along a path

Animation > Tools > Set Motion lets you create several different kinds of segments of animation.

For example, you can do the following:

Overview

When you use Set motion, up to four different types of animation are computed, depending on the current option settings:

How to use

To use Set motion, choose it from the Animation menu or click its icon.

Using Motion Path with Bank and Follow

When used with the default option settings, Set motion animates an object along a motion path with both Follow and Bank animation, using a combination of three types of animation. These defaults ensure that the assigned object rotates to continually point in the direction of the path curve throughout the motion. The object will also bank appropriately through areas of varying degrees of curvature if the Maximum Bank option is set to a value other than zero.

The following steps show how to create a motion path with Follow:

  1. Create a NURBS curve to define the motion path that you want the object to follow.
  2. Choose Surfaces > Primitives > Cone to create a cone primitive.
  3. Position the cone so that the point that you want to follow the curve (for example, the tip of the cone) is at the origin. Orient the cone so that it will start at the beginning of the curve to your specifications.

    NoteIf the final position of the motion curve is not near the origin, make a copy of the curve (Edit > Duplicate > Object ) and place the start of the copied curve at the origin. Use this curve to help you set the orientation of the object. This curve can be deleted later.
  4. Create a new group for the object in this position (Edit > Group ). See the side examples.

  1. Pick the grouped object to which you want to assign a motion path, and then choose Animation > Tools > Set Motion . The system prompts:
    Pick a curve to be used as a motion path.

    Click directly on the curve that you want to assign as the motion path. It is assigned as a motion path for the active object.

  2. Choose Animation > Show > Playback to view the animation.

    Because Follow was toggled on, notice how the object rotates to follow the path curve and is continually pointing straight ahead throughout the entire frame sequence.

    The Action Window displays action curves for the rotation of the object around all three axes.

    These curves represent the necessary rotation of the object to maintain the original orientation to the path curve. You can edit any of these action curves to fine-tune the animation of the object.

Using the Flow option

NoteSpline IK is another alternative for creating flowing motion along a path.

The following example describes how to animate a snake slithering along a path.

  1. Create the model of the snake (you can use a simple cylinder primitive if you want).
  2. Create the path that you want the snake to follow.
  3. Choose Anim > Set motion r to display the Set Motion Options window.
  4. Click Reset to reset default settings.
  5. Toggle Flow on. The default options ensure that the assigned object maintains its original orientation to the path curve throughout the entire motion and that it banks appropriately through areas of varying degrees of curvature. Bank and Follow should be left toggled on.
  6. Set the Maximum Bank option to a positive number (such as 30, for example), and click Save to save the current parameter settings.

Creating smooth and natural movement when using Flow

  1. Position the object (the snake body in this example), so that the tip of its head (the front-most point of the object) is at the start point of the path curve.
  2. Choose Transform > Local > Set Pivot to set the rotation pivot to the tip of the snake’s head (the front of the object).
  3. Use Transform > Rotate on the object to orient the snake so that it is pointing in the direction it will travel along the motion path. It should be positioned so that it is aligned tangent to the start of the curve.
  4. Select the model of the snake that you have created to make it active.
  5. Choose Set motion. The system prompts:
    Pick a curve to be used as a motion path
  6. Click directly on the curve that you want to assign as the motion path.

    A series of messages appear on the prompt line, informing you of the animation’s progress.

  7. Choose Animation > Show > Playback to view the animation.

If you don’t like the generated animation, you can delete the clusters that were created to animate the snake (ensure that the clusters are the only active geometry and then choose Delete > Delete Active .) Since all the flow animation was on the clusters, the snake will no longer be animated and you can start again. You may want to try increasing the Flow Slices and/or the Maximum Bank values to increase the amount of banking.

Animating the camera along a motion path

  1. Choose Layouts > All Windows > All Windows to create a default window set.
  2. Create a curve that represents the path you want the camera’s eye to follow.
  3. Choose View > Reset View and click in the perspective window that belongs to the camera you want to affect. This forces the Up point of the camera to point straight up above the camera eye.
  4. Choose Pick > Object and pick the eye DAG node above the camera, as shown in the following diagram.

  5. Choose Set motion r to display the option window. Ensure that only the Motion Path and Camera Up options are selected, and then click Go to invoke the function.
  6. Click directly on the curve that you want to assign as the motion path. A new motion path is created for the Up DAG node of the camera.
  7. Choose Animation > Show > Playback to view the camera animation. The animation may not be satisfactory because, although the camera is moving, its lookat point is still fixed.
    NoteIf you animate the camera along a motion path curve that has knot multiplicity, the rendered animation will look different than the animation in the perspective window. In these cases rebuild the curve or choose Curve Tools > Use result in the Action window.

Animating the look at point of the camera

  1. Pick the view DAG node, which is the DAG node directly above the camera view node as shown in the following illustration.

  2. Choose Set motion r to display the option window.
  3. Change the Start and End values to 1 or 2 frames less than what they were set for animating the camera up and eye nodes. You can use negative frame values if necessary. For example: if the eye and up nodes were animated with frame values of 1 and 30, use -3 and 27.
  4. Ensure that only the Motion Path option is selected, and then click Go.
  5. When prompted to select the curve to be used as a motion path, click the same curve that is being used as the motion path for the eye DAG node.
  6. Choose Animation > Show > Playback to view the camera animation. It will be easier to monitor the camera animation if you toggle the camera visible. To do this, choose WindowDisplay > Toggles > Cameras . Ensure that the camera is also toggled ON in the Optimization Options section of the Animation > Show > Playback options window.

Set Motion Options

Motion Path

Motion path animation means that the objects move along a selected curve. The Motion Path option creates X, Y, and Z axis translation animation for each of the selected objects. If translation animation already exists for the active objects, it is replaced by the motion path animation.

The curve you want to use as the motion path must exist before you invoke the function. Curve-on-surface elements are not valid motion paths and must be converted to world space curves using Curve Edit > Create > Duplicate Curve .

NoteIf you are not using the Flow option, then the point on the object that makes contact with the motion path curve during animation is the point that touches the origin (0,0,0) when there is no translation on the DAG node to be animated by a motion path.
Follow

To change the point on the object that will travel along the curve, position the object so that this point touches the origin, group the object using Edit > Group , then use Animation > Tools > Set Motion on the grouped DAG node.

Ensures that the object assigned to the motion path rotates as necessary to maintain its original orientation to the path curve throughout the entire animation along the path. It points in the direction in which it is traveling (up or down, left or right) at all times. The Follow option animates the rotational parameters of the object in conjunction with the Bank option.

Camera Up

Applies a motion path curve to animate the Up DAG node of an animated camera or above its Eye DAG node. This option lets you control the camera animation, preventing the camera from twisting and turning upside down (as it would if the Up DAG node was not animated with respect to the Eye DAG node).

Camera Up creates X, Y, and Z translation animation for the Up DAG node of a camera. To create the animation on the Up DAG node of the camera, pick the DAG node above the Eye of the camera. If any translation animation already exists for the Up nodes, that animation is deleted.

Alternately, you could choose View > Local Move Camera > Twist to position the up point. It is easier to position the up point of the camera if you display the camera using WindowDisplay > Toggles > Cameras .

Before choosing Set motion, pick the Up DAG node for the camera you want to affect and move the Up point to the world space position that describes the sense of up for the eye point. Then choose Set motion. A NURBS curve is created that will be assigned as a motion path for the Up DAG node of the camera.

Bank In/Out

Banking In means the object will lean in towards the center of the curve that it travels along (like a motorcycle going around a corner).

Banking Out means the object will lean away from the center of the curve. Banking only occurs if Degree is set greater than 0.00.

For Follow and Bank animation to be computed, the active DAG node or at least one DAG node above it in the hierarchy must have positional animation.

  • If Motion Path is toggled on, these DAG nodes will have positional animation applied.
  • If Motion Path is toggled off, the objects must have positional animation as a result of having previously been animated using Animation > Keyframe > Set Keyframe or another animation tool.

You can also have animation in the DAG node above the picked DAG node that is just rotational animation. In the DAG node below, this appears like a translation in an arc and Follow and Bank animation can then be computed.

NoteWhen using either Follow and Bank, before invoking Set motion you must orient the object so the system knows which way you think is the object’s up, and which way you think is the object’s front (or looking ahead point). The object should be oriented for the first frame of the animation that will be computed for Follow and Bank. If Range is set to All, this will be the first frame of the animation. If Range is set to Option Window, then orient the object for the Start frame. In either case, choose Transform > Rotate to orient the object and Transform > Local > Set Pivot to position the rotation pivot of the object as the point on the object about which the Bank animation is to occur.
Maximum Bank

The maximum allowable degree of banking. If set to 0.00, the object will not bank even if the Bank option is toggled on. The object will bank the amount specified by the Maximum Bank option when it is at the point on the curve with the highest curvature. It will bank a proportional number of degrees as the curvature changes. (It will not bank at all where the curvature is a straight line.)

Range

Determines whether the animation is applied to the entire frame range of the animation (All) or only to the frame range specified by the current Start and End Frame values in this option window.

Start/End frame

Defines the start and end frame values for the animation in relation to the entire animation. These settings only apply when Range is set to Option Window.

Sample By

Used by the Follow and Bank options to determine how often to sample the positional animation when computing rotational animation. A keyframe is created for every Sample By frame.

This option is also used by the Camera Up option to determine how often to sample the Eye DAG node’s animation of a camera. The motion path curve that is created for the camera will have one CV for each sample of the eye DAG node’s animation.

Be careful to choose Start, End, and Sample By values that have a sufficient number of sample points along the length of the motion path to avoid sampling errors. As a general rule of thumb, you will encounter sampling errors if the change in tangency between any two adjacent sample points is greater than or equal to 90 degrees.

Sampling error can be remedied by increasing the number of samples taken, either by increasing the frame range or decreasing the Sample By value.

For example, animate an object using a circle primitive as the motion path, with Start at 0.0, End at 4.0, and Sample By at 1.0. The total sample points is 5. Since all of these sample points are 90 degrees apart, there are several chances for sample error to creep in and flip the animated object when you play back the animation.

Flow

When you toggle Flow ON (indicated by a check mark), Flow animation is applied to the geometry below each of the picked DAG nodes.

Flow Slices

When you toggle Flow ON, the Set Motion Options window expands to display the following slider:

This is used by the Flow option to determine the number of slices, or clusters, that the object should be divided into for flowing.

Each cluster is animated independently. Unnecessary slices can be expensive in terms of processing speed. As a rule, the more CVs there are lengthwise on the object (from front to back as it travels along the path), the more slices you need. For a simple object such as a cylinder, for example, a few slices is sufficient.