Lets you view a cross section of surfaces or meshes by dragging a plane through the model.
Unlike the regular Cross section tool, this tool can produce cross-sections in an arbitrary orientation by using a series of parallel planes with a distance between them specified by Step Size.
The number of cross-section lines to create.
The distance between cross-section lines (when Mode is Parallel and Number of Planes is greater than 1).
Controls the size of the curvature combs on the cross-section lines.
This flag determines whether the sections will remain after exiting the tool.
These options let you visually clip the wireframe and shaded model, leaving the sections visible.
Check this option to display only the part of the model with the sections (on one side of the sectioning plane).
This option is only available if Visual Clip is turned on.
When checked on, a second clipping plane appears, and the display of surfaces/meshes is clipped to the location and direction of that second plane as well, leaving only the part of the model between the two planes visible.
The Clip Offset slider specifies the offset distance of the second clipping plane from the first.
These fields specify the position (X,Y,Z) of the sectioning plane’s origin. They let you cut a section at a precise location along one of the main world axes (for example x = 100).
These fields specify the rotation angle of the sectioning plane around the world X,Y,Z axes.
Click the Rotation Reset button in the view window to reset all rotations to 0.
